On this page 4 sections
Shelly published a security advisory on November 9, 2026 that it rates critical, 9.5 on the CVSS 4.0 scale. SHEL-2026-001 covers every Shelly Gen2 and newer device, meaning the Plus, Pro, Gen3 and Gen4 lines plus the BLU Gateway and Shelly cameras, that runs firmware from before the fix. Their firmware trusted two root certificates under which eight eMudhra certificate authorities were issued, and the private keys of those authorities have been compromised. Shelly released fixed firmware 1.7.6, 2.0.3 and 2.1.1 on October 26, and the 2.2.0 release of November 11 carries the same fix. Every Shelly in Matterhome's catalogue falls under the advisory, from the 1PM Gen4 relay to the Presence Gen4 sensor.
The advisory tells owners to update in the Shelly Smart Control app or the device's local web interface. If your Shellys sit in Apple Home, Google Home, Alexa or SmartThings over Matter, don't wait for that controller to offer the update. Apple home hubs, SmartThings hubs and Home Assistant's Matter integration look for Matter firmware on the CSA's Distributed Compliance Ledger, and all 25 Shelly models listed there have version records with no update file attached, so they have nothing to install. Shelly doesn't say it delivers firmware through Google Home or Alexa either; its advisory names only its app and the device's web interface.
What the flaw allows
Shelly's devices check each server they connect to against a list of trusted root certificates built into their firmware. Someone holding one of the compromised keys can create a certificate for any domain that older firmware accepts as genuine. An attacker who can also intercept a device's traffic, through a compromised router, a rogue Wi-Fi network or DNS hijacking, could then pose as the Shelly cloud, as an MQTT broker you set up, or as a server one of your scripts calls. According to the advisory, that attacker could read the credentials and tokens the device sends and forge commands that switch outputs, change the configuration or alter what a script does. Shelly says it isn't aware of the flaw being exploited, and connections for which you uploaded your own CA certificate aren't affected.
The advisory lists HTTPS, MQTT and WebSocket connections and says nothing about Matter. A Shelly you control through Matter still carries the old trust store until it updates, and one you also added to the Shelly app can keep its cloud connection running alongside Matter, so update it whichever controller you use.
Which firmware has the fix
| Shelly line | Fixed firmware |
|---|---|
| Gen3, Gen4 and in-production Gen2 models on the 2.x lines | 2.1.1 or newer, including 2.2.0 and 2.2.1; 2.0.3 on the 2.0 line |
| Devices still on the 1.x line, including Gen2 models frozen on 1.7.x such as the Plus 1, Plus 1PM, Plus 2PM, Plus Plug S and Plus H&T | 1.7.6 |
| BLU Gateway / BLU Gateway Gen3 | 1.7.6 / 2.0.3 |
| Shelly cameras | 2.3.99-cameraprod13 |
| Wall Display | Separate firmware; Shelly is still checking it |
Shelly's update policy explains the 1.7.6 line: Gen2 models that have a direct Gen3 or Gen4 replacement stopped getting new features at 1.7 and receive only critical fixes.
If you own a 1PM Mini Gen3 or 1PM Mini Gen4, skip 2.2.0 and install 2.2.1, released November 13. On those two models 2.2.0 renamed the device's identifier without moving its stored password, so on a device with a password set, the web interface and integrations such as Home Assistant rejected the correct password, and MQTT setups that track the device by its client ID or topic prefix lost it. Version 2.2.1 restores the original identifier. If you set or changed the device password while on 2.2.0, the changelog explains how to set it again so the web interface accepts it.
The Wall Display is a separate case
The Wall Display panels run their own Android-based firmware, which the advisory says Shelly is still checking. On November 16 the advisory was still at version 1.0, with no result for the panels. Separately, Wall Display firmware 2.8.5, released November 11, fixes four flaws: the panel's logs, crash reports and media library files could be downloaded, and its live log watched, without the device password, and the logs could hold more information than they needed. Install 2.8.5 on every panel that offers it. Matterhome's Wall Display story covers what the panels do as Matter controllers.
Update every Shelly now
Shelly's advice is to update every device, and there are three ways to do it:
- In the Shelly Smart Control app, open the device, then its Settings tab and Firmware versions, and tap Update. The same screen's "Enable auto update" toggle adds a schedule for automatic updates, so the next fix doesn't wait for you.
- Without the app, open the device's IP address in a browser and go to Settings, then Firmware, where the web interface lists available versions and installs them.
- In Home Assistant, a Shelly added through the Shelly integration has a firmware update entity that installs the latest stable release. On battery-powered models such as the Flood Gen4, the entity only reports that an update is available and can't start it. A Shelly added only through the Matter integration has no Shelly firmware to install there, because the ledger holds none.
Shelly also recommends using your own CA certificate for MQTT and outbound WebSocket connections, keeping a device you can't update yet on a network you trust, and checking for scripts, webhooks, schedules or configuration changes you didn't make. Wall Display owners should watch the advisories page for the result of Shelly's check on the panels.
- Editor
- JC Martinez
AI tools may help draft or organize pages. Matterhome checks product claims against cited sources before publication.
Spot a mistake or missing context?
Send a quick note so it can be checked against the source material.



