Roborock Qrevo CurvX

The low body is the feature worth paying for

Qrevo CurvX is interesting for a simple reason: it can get into places that a tall navigation tower rules out. With its LiDAR sensor lowered, the robot is 79.8 mm high. If the gap beneath your bed is just over eight centimeters, that difference can turn an unreachable dust trap into part of the regular cleaning route. Measure the lowest point, including sagging fabric, before treating the specification as a fit guarantee.

The price now makes the rest of the package easier to like. On September 11, 2026, Office Partner had the white European QRCX02-00 in stock for €649 including VAT, with shipping advertised from €5.99. Roborock's own German listing was €799 and sold out. At the retailer price, CurvX is a sensible shortlist choice for a mixed floor plan; the more expensive direct listing is not the offer I would choose.

A better fit for awkward doorways

The lifting chassis is the other useful distinction. Roborock specifies crossing up to 3 cm for a single threshold and 4 cm for a suitable two-stage threshold. That does not mean a straight four-centimeter ledge, and it does not turn the robot into a stair climber. Still, it gives CurvX a stronger case than an ordinary low-clearance robot when raised doorway tracks divide your rooms.

Two spinning pads handle mopping, with one extending toward edges. An extending side brush and the split DuoDivide main brush address corners and hair handling. These are sensible pieces of equipment, but a brush design or suction figure cannot tell us how well it will collect embedded dirt from your carpet. This is a buying assessment of the hardware and ownership tradeoffs, not a cleaning test.

Carpet is where the compromise becomes clearer. The pads can rise 17 mm when the chassis is raised, but they stay on the robot. CurvX does not leave them at the dock for a dry vacuuming pass. Short rugs are a more natural match than deep pile where attached wet pads could brush the fibers.

The dock saves work, then creates a smaller chore

The rounded station washes and dries the pads, empties dust and replenishes the robot's water. Warm water is supplied to the onboard tank after washing; the advertised up-to-80°C figure describes dock washing, not an 80°C mop running across the floor.

There is no automatic detergent cartridge. You still handle the clean and dirty water tanks and add the recommended solution manually. The dock itself measures 450 mm in each direction, and the tanks lift out from above. It belongs somewhere you can reach comfortably, rather than squeezed into a cabinet that only just fits its shell.

Roborock specifies cleaning the main brush and filter every two weeks and the side brush monthly. A washed filter needs at least 24 hours to dry. Pad replacement is suggested every one to three months, depending on use. Automatic washing is worthwhile, but it does not eliminate consumables or a regular encounter with dirty parts.

There is also a camera, with remote viewing and pet-photo functions. Those may be welcome extras; they are unnecessary hardware if you dislike a moving camera inside your home. Matter adds basic shared control, with actual CurvX Apple Home use corroborated by an owner. Maps, detailed cleaning choices and camera functions still belong in Roborock's app.

Buy it for the spaces it can reach

The Qrevo Curv 2 Flow was €699 at the same German check. Its continuously rinsed roller is appealing for frequent hard-floor mopping, but its 119 mm body gives up almost four centimeters of furniture clearance. I would choose CurvX if that height difference decides which rooms actually get cleaned.

Dreame Matrix10 Ultra offers automatic mop-set swapping and detergent dosing for a more elaborate cleaning routine. Its 89 mm lowered height still will not fit every gap that CurvX can. Keep a working robot if it already reaches your floors and pad washing is manageable; CurvX earns an upgrade by solving a physical access problem.