# WAGO Home Blind Control (2757-1106)

WAGO Home Blind Control is a compact direct-Matter retrofit for compatible European blind, roller-shutter, and awning motors. Its local-control fallback and installer handoff are thoughtful, but the mains wiring, motor checks, calibration, and undocumented platform differences make one-room validation essential.

Canonical page: https://matterhome.io/devices/wago-home-blind-control
Markdown page: https://matterhome.io/devices/wago-home-blind-control.md
Author: Matterhome Editorial Team
Author profile: https://matterhome.io/authors/matterhome-editorial-team
Editorial lead: JC Martinez
Editor profile: https://matterhome.io/authors/jc-martinez

## Device Facts

- Brand: WAGO
- Model: Home Blind Control (2757-1106)
- Product type: In-wall Matter-over-Thread blind controller
- Category: Shades and shutters
- Connection: Matter over Thread
- Matter status: WAGO sells article 2757-1106 with direct Matter over Thread. CSA certifies firmware 2.1.0, hardware 1.0, Matter 1.2, product ID 0x1106, and the Window Covering device type for the exact controller.
- Launch date: 2026-05
- Thread border router required: Yes
- Brand hub required: No
- Typical price range: €61.49 current German price
- Markets: Europe
- Review status: Compatibility guide
- Product image: https://assets.matterhome.io/content/devices/wago-home-blind-control/product.433d8b6d02297b006621/source.webp
- Product image alt text: White WAGO Home Blind Control 2757-1106 module with orange lever terminals and a Matter QR code
- Product image source: https://www.wago.com/medias/2000-18732878-DE.jpg?context=bWFzdGVyfGltYWdlc3wxMzEyNjR8aW1hZ2UvanBlZ3xhR0k1TDJobE9DOHhOalF4TnpVMk56azVOems0TWk4eU1EQXdYekU0TnpNeU9EYzRYMFJGTG1wd1p3fDBmNDM1OTU4NjBjY2I3MjcwNjM5OWE5MDhjMzIwOTM2NjUwMDcyZmVjNjNiMWVjMWQzYTJjYzdhMDRmNjZmZjM

## Ecosystem Support

- Apple Home: Supported
- Google Home: Supported
- Alexa: Not listed
- SmartThings: Not listed
- Home Assistant: Not listed

## Best For

- European renovations that should keep existing local blind or shutter controls
- Compatible reversible shade motors with end-position switches and loads no greater than 3 A
- Electricians preparing several devices before handing the Matter project to a homeowner
- Thread homes that want a hub-free WAGO control path

## Skip If

- The motor type, voltage, end-position switches, current draw, or wiring is unknown
- A qualified electrician cannot install and commission the mains-powered module
- The wall box cannot fit the module and wiring safely behind the switch
- Exact control behavior in an ecosystem other than Apple Home or Google Home must be guaranteed before purchase

## Setup Notes

- Confirm article 2757-1106, a compatible 200-240 V reversible motor with end-position switches, a load no greater than 3 A, and enough wall-box space for the 46 x 46 x 22 mm module.
- Have a qualified electrician isolate power, wire the two interlocked motor outputs and local inputs, and follow local electrical rules.
- Provide a Matter controller and Thread border router on the same network segment, then scan the Matter code from the front of the module or use the printed code on its rear.
- Use the WAGO Home Setup App when the installer is preparing a multi-device project or needs settings that the ordinary Matter app does not expose.
- Complete an unobstructed reference run from one end position to the other and verify local, app, and automation control before repeating the installation.

## Known Limitations

- Connected blind, roller-shutter, and awning motors must have end-position switches and draw no more than 3 A.
- The IP00 module is intended for a protected flush-mounted box and operates from -5 to 35 degrees Celsius.
- WAGO explicitly names Apple HomeKit and Google Home as commissioning examples but does not publish an exact cross-platform control matrix.
- The confirmed live purchase path is German; availability elsewhere in Europe should be checked with WAGO or a local electrical wholesaler.
- Matterhome has not tested wiring, motor compatibility, travel calibration, commissioning, Thread range, firmware updates, or ecosystem controls.

## Pros

- Adds direct Matter-over-Thread control to compatible blind, roller-shutter, and awning motors without a WAGO hub
- Keeps two local switch or button inputs working even if the Matter network is unavailable
- Uses interlocked relay outputs for reversible motors drawing no more than 3 A
- Lets an electrician prepare travel settings and hand the project to the homeowner through the WAGO Home Setup App

## Cons

- Requires a qualified electrician and a 200-240 V flush-mounted installation
- Needs a Matter controller with a Thread border router
- The exact Alexa, SmartThings, and Home Assistant feature sets are not documented
- Some setup properties and fallback firmware updates still depend on the WAGO app

## Sources

- https://www.wago.com/global/home-automation/home-blind-control/p/2757-1106
- https://www.wago.com/de/verbindungstechnik/homeautomation
- https://www.wago.com/wagoweb/documentation/2757/ger_manu/m27571105_00000000_0de.pdf
- https://csa-iot.org/csa_product/wago-home-blind-control-3/
- https://www.watt24.com/en/p/wago-home-blind-control-2di-2do-3-a-thread-2757-1106/
- https://www.wago.com/medias/2000-18732878-DE.jpg?context=bWFzdGVyfGltYWdlc3wxMzEyNjR8aW1hZ2UvanBlZ3xhR0k1TDJobE9DOHhOalF4TnpVMk56azVOems0TWk4eU1EQXdYekU0TnpNeU9EYzRYMFJGTG1wd1p3fDBmNDM1OTU4NjBjY2I3MjcwNjM5OWE5MDhjMzIwOTM2NjUwMDcyZmVjNjNiMWVjMWQzYTJjYzdhMDRmNjZmZjM

A hidden shade controller succeeds or fails at the handoff. The electrician needs a safe, repeatable way to wire and calibrate it, while the homeowner needs working wall controls and a Matter code that joins the chosen smart-home platform. WAGO's Home Blind Control `2757-1106` is designed around that split.

The compact module sits behind a switch, controls a compatible blind, roller shutter, or awning motor, and connects directly over Matter and Thread. Its local inputs keep controlling the motor when the smart-home network is unavailable. Matterhome has not tested the controller or its integrations.

## One module covers several kinds of shade

WAGO rates the two interlocked relay outputs for reversible motors drawing no more than 3 A. The [product manual](https://www.wago.com/wagoweb/documentation/2757/ger_manu/m27571105_00000000_0de.pdf) permits slatted blinds, roller shutters, and fabric shades, provided the motor has its own end-position switches. The module is 46 x 46 x 22 mm and runs from 200-240 V AC.

That flexibility is useful, but it does not remove the electrical survey. A qualified electrician must confirm the motor, current, direction wiring, local switch or button inputs, and usable space inside the flush-mounted box. WAGO rates the bare module IP00, so it depends on the protected installation around it.

The local controls are more than spare inputs for automations. WAGO ships the module with a logical bridge between its inputs and outputs. A button press can therefore move or stop the shade directly, even during a network failure. The bridge can be disabled in the WAGO Home Setup App when the inputs should act only as Matter events, but keeping the default behavior gives the wall control a useful fallback.

## The electrician owns the first half of setup

WAGO's project workflow is the most distinctive part of this controller. An electrician can prepare devices, set blind travel times, and hand the project to the homeowner through the WAGO Home Setup App. That avoids asking the homeowner to expose a newly wired module just to find its QR code.

There are still two Matter codes on the hardware: a QR code on the front and the same code in plain text on the rear. Record the code before the wall switch goes back on. For normal commissioning, a Matter controller and Thread border router must be on the same network segment. The WAGO app is optional for a basic one-device Matter setup, but the manual says some properties are available only there and recommends it for multiple products.

The final mechanical step is a full reference run. It records the travel time needed to position the shade and can be started from the WAGO app, the connected buttons, or Matter. The path must remain unobstructed from one end position to the other. WAGO rejects a new reference time when it differs from the saved time by more than 10 percent or when movement or power is interrupted.

## Matter makes control portable, not identical

The latest [CSA certificate](https://csa-iot.org/csa_product/wago-home-blind-control-3/) identifies the exact controller as product ID `0x1106`, firmware `2.1.0`, hardware `1.0`, and a Matter 1.2 Window Covering device over Thread. WAGO does not require a separate brand hub.

The manual names Apple HomeKit and Google Home as commissioning examples. WAGO's broader product language says the module works with common modern smart-home platforms, but it does not show an exact table for position, stop commands, local-button state, scenes, routines, or firmware updates in each one. Alexa, SmartThings, and Home Assistant therefore remain verification jobs rather than promises in this guide.

Firmware deserves its own check. WAGO uses Matter's over-the-air update process, but notes that some ecosystems do not yet provide the required standards-based path. Its documented fallbacks are adding the device to the WAGO Home Setup App on Android or to Apple Home on iOS and iPadOS through Matter multi-admin. Include update status in the one-device trial rather than assuming the primary platform handles it.

## Test the handoff before repeating it

WAGO says its first Home Automation modules became available through electrical wholesalers and its own sales channels in May 2026. On September 6, 2026, [Watt24 listed the exact 2757-1106](https://www.watt24.com/en/p/wago-home-blind-control-2di-2do-3-a-thread-2757-1106/) at €61.49 with immediate German stock. That is a useful current price signal, not a guarantee for every European market.

The [WAREMA Xeenos Go blind actuator](/devices/warema-xeenos-go-aktor-jalousie-up) is the closer specialist alternative for a venetian blind project, while [Eve Shutter Switch](/devices/eve-shutter-switch) replaces the visible wall control instead of hiding behind it. WAGO's appeal is broader shade-motor coverage, compact depth, retained local inputs, and an installer-oriented handoff at a lower current German price.

Start with one window. Have the electrician record the Matter code, finish the wiring, confirm both directions and end positions, and complete the reference run. Then test local control, app position, automations, Thread recovery, and the firmware path in the homeowner's actual ecosystem. Only repeat the design after both halves of that handoff work.