# Tado Wireless Smart Thermostat X Starter Kit

Wireless Smart Thermostat X Starter Kit is the Tado X route for boilers that need a receiver instead of a simple wired wall thermostat swap. Its Matter over Thread path is direct, and the included receiver handles the Thread border router role.

Canonical page: https://matterhome.io/devices/tado-wireless-smart-thermostat-x
Markdown page: https://matterhome.io/devices/tado-wireless-smart-thermostat-x.md
Author: Matterhome Editorial Team
Author profile: https://matterhome.io/authors/matterhome-editorial-team
Edited and fact-checked by: JC Martinez
Editor profile: https://matterhome.io/authors/jc-martinez

## Device Facts

- Brand: Tado
- Model: Wireless Smart Thermostat X Starter Kit
- Product type: Wireless Smart Thermostat Kit
- Category: Thermostats
- Connection: Matter over Thread
- Matter status: Tado lists the Wireless Smart Thermostat X Starter Kit as a Tado X Matter and Thread product; its Wireless Receiver X also functions as a Thread border router.
- Launch date: 2024
- Thread border router required: No
- Brand hub required: No
- Typical price range: EUR140-EUR200
- Markets: Europe, United Kingdom
- Review status: Compatibility guide
- Product image: https://matterhome.io/content-assets/devices/tado-wireless-smart-thermostat-x/product.webp
- Product image alt text: Tado Wireless Smart Thermostat X Starter Kit
- Product image source: https://cdn.shopify.com/s/files/1/0552/4992/8391/files/eu_wireless_smart_thermostat_x_wb_product_1x1_1108_20_1_c657ce2e-64ea-47bc-85de-67600d1da925.webp?v=1762159875

## Ecosystem Support

- Apple Home: Supported
- Google Home: Supported
- Alexa: Supported
- SmartThings: Supported
- Home Assistant: Supported

## Best For

- Boilers or heat pumps that need a wireless thermostat receiver
- Homes replacing an existing wireless thermostat setup
- Tado X buyers who want the Thread border router built into the heating kit

## Skip If

- A wired thermostat replacement is simpler for your heating system
- Your boiler or heat pump fails the compatibility check
- You expect hot water or OpenTherm details to be fully portable through Matter

## Setup Notes

- Use Tado's compatibility checker before buying for a boiler or heat pump.
- Wire the Wireless Receiver X to the heating system, then use the wireless sensor as the room control point.
- The included receiver can replace Bridge X for the Tado X Thread path.

## Known Limitations

- It is not compatible with Tado V3+ systems.
- Hot water, OpenTherm, scheduling, and Tado services may not appear the same way in every Matter ecosystem.
- Installation depends on the heating system and receiver wiring.

## Pros

- Matter and Thread thermostat kit for boilers without a wired room thermostat path
- Includes Wireless Temperature Sensor X and Wireless Receiver X
- Receiver functions as a Thread border router
- Supports many relay and OpenTherm boilers and heat pumps

## Cons

- Boiler or heat pump compatibility still decides the purchase
- More hardware to install than the wired thermostat
- Tado app behavior and Matter behavior are not identical

## Sources

- https://www.tado.com/en/products/boilers-underfloor-heating
- https://shop.tado.com/en/products/wireless-smart-thermostat-x-starter-kit
- https://shop.tado.com/en/products/wireless-receiver-x
- https://cdn.shopify.com/s/files/1/0552/4992/8391/files/eu_wireless_smart_thermostat_x_wb_product_1x1_1108_20_1_c657ce2e-64ea-47bc-85de-67600d1da925.webp?v=1762159875

## The kit is the product

Wireless Smart Thermostat X is not just a loose room sensor. The starter kit combines Wireless Temperature Sensor X with Wireless Receiver X, so the boiler can be controlled even when there is no useful thermostat wire at the room location.

That receiver is the important difference from the wired thermostat. It is wired at the heating system, talks to the Tado X setup, and Tado says it also functions as a Thread border router.

## Setup path

Start with the compatibility checker. Tado says the kit is for many relay and OpenTherm gas boilers and heat pumps, but "many" is not the same as "yours." If the receiver wiring is uncertain, treat that as the real work.

Once the receiver is installed, the wireless temperature sensor becomes the room control point. Matter over Thread can then bring the thermostat into Apple Home, Google Home, Alexa, SmartThings, or Home Assistant, while Tado remains the management app.

## Why it may beat the wired model

Choose this kit when a wired thermostat replacement would put the control in the wrong place, or when the boiler needs a receiver because there is no existing wall thermostat path.

It is also cleaner for a first Tado X install if you do not already have a Thread border router. The receiver covers that role, so Bridge X is not a separate first purchase.

## Should you buy it?

Buy the wireless kit when the heating system needs a receiver and Tado confirms the match. Skip it if the wired thermostat can do the same job with less hardware.