# Leviton Decora Smart ELV/LED Phase Selectable Dimmer (D2ELV-1BW) Leviton D2ELV is the Matter dimmer to consider when an electronic low-voltage or reverse-phase LED fixture rules out ordinary smart dimmers. Its direct Wi-Fi path is simple, but a neutral wire, the exact fixture load, and Leviton's companion-switch rules must all fit the circuit. Canonical page: https://matterhome.io/devices/leviton-d2elv-phase-selectable-dimmer Markdown page: https://matterhome.io/devices/leviton-d2elv-phase-selectable-dimmer.md Author: Matterhome Editorial Team Author profile: https://matterhome.io/authors/matterhome-editorial-team Editorial lead: JC Martinez Editor profile: https://matterhome.io/authors/jc-martinez ## Device Facts - Brand: Leviton - Model: Decora Smart ELV/LED Phase Selectable Dimmer (D2ELV-1BW) - Product type: Matter ELV/LED Phase Selectable Dimmer - Category: Switches - Connection: Matter over Wi-Fi - Matter status: Leviton ships D2ELV-1BW with a Matter setup code for direct pairing over 2.4 GHz Wi-Fi; its current CSA record covers firmware 2.3.10 and Matter 1.3, and no Leviton hub is required. - Launch date: 2024-07-25 - Thread border router required: No - Brand hub required: No - Typical price range: About $77 at current US retail - Markets: North America - Review status: Compatibility guide - Product image: https://matterhome.io/content-assets/devices/leviton-d2elv-phase-selectable-dimmer/product.webp - Product image alt text: White Leviton D2ELV dimmer in front of a phone showing My Leviton controls - Product image source: https://leviton.com/content/dam/leviton/residential/product_images/d2elv-1bw/D2ELV_main.jpg ## Ecosystem Support - Apple Home: Supported - Google Home: Supported - Alexa: Supported - SmartThings: Supported - Home Assistant: Limited ## Best For - Under-cabinet, toe-kick, track, recessed, and accent lighting built around ELV or reverse-phase LED drivers - North American homes that want direct Matter control without adding a brand hub or Thread border router - Multi-location lighting where a supported Leviton wired or wire-free companion is acceptable ## Skip If - The wall box has no neutral conductor or the fixture uses magnetic low-voltage dimming - The circuit controls a motor, receptacle, or transformer-operated appliance - An existing multi-way circuit must keep an ordinary 3-way switch - A less expensive forward-phase LED dimmer already matches the fixture ## Setup Notes - Confirm line, load, neutral, and ground conductors before installation; use a qualified electrician when the circuit or fixture type is uncertain. - Check the actual load against Leviton's limits of 600 VA for ELV, 300 W for dimmable LED or CFL, and 600 W for incandescent or halogen lighting. - Use a compatible 2.4 GHz Wi-Fi network and pair from the chosen Matter controller; My Leviton can be added separately for Leviton settings and maintenance. - For multi-location control, use a supported DD00R, DD0SR, DAWDC, or DAWSC companion rather than an ordinary 3-way switch. ## Known Limitations - D2ELV is an indoor dimmer for North American 120 V lighting circuits and requires a neutral wire. - The dimmer is not compatible with a standard 3-way switch or with magnetic low-voltage lighting and motor loads. - Leviton documents fade rates, minimum and maximum levels, bulb mode, schedules, and night settings in My Leviton rather than promising those controls through Matter apps. - Leviton does not advertise energy monitoring for this model. - Leviton does not list Home Assistant for D2ELV, so verify the light entity and dimming range through Home Assistant's Matter integration before relying on it. ## Pros - Ships ready for direct Matter-over-Wi-Fi pairing without a Leviton hub - Supports forward- or reverse-phase dimming for ELV and dimmable LED lighting - Also handles documented CFL, incandescent, and halogen loads - Works in single-pole and supported multi-location installations with Leviton companions ## Cons - Requires a neutral wire and a 120 V, 60 Hz circuit - Costs more than a general-purpose smart LED dimmer - Cannot control magnetic low-voltage lighting, motors, receptacles, or transformer-operated appliances - Fixture-specific dimming behavior still needs testing after installation ## Sources - https://leviton.com/products/d2elv-1bw - https://leviton.com/products/residential/smart-home/matter - https://leviton.com/content/dam/leviton/residential/product_documents/instruction_sheet/DI-000-D2ELV-02C-W.pdf - https://leviton.com/company/press-releases/leviton-unveils-new-decora-smart-wi-fi-elv-led-phase-selectable- - https://csa-iot.org/csa_product/d2elv/ - https://www.homedepot.com/p/331802987 - https://www.home-assistant.io/integrations/matter/ - https://leviton.com/content/dam/leviton/residential/product_images/d2elv-1bw/D2ELV_main.jpg Some LED fixtures turn a routine smart-dimmer purchase into an electrical compatibility problem. Under-cabinet strips, recessed accent lights, and other fixtures with electronic low-voltage drivers may need reverse-phase dimming, while many common wall dimmers are built for forward-phase loads. Leviton D2ELV-1BW is meant for that narrower job and adds direct Matter-over-Wi-Fi control without a Leviton hub. That makes D2ELV useful, not universal. It needs a neutral wire, a 120 V circuit, and a compatible dimmable load. Matterhome has not tested its low-end performance or platform behavior, so the purchase should start with the fixture and wiring rather than the ecosystem logos. ## The fixture decides whether this dimmer is worth $77 D2ELV can use forward- or reverse-phase dimming. Leviton rates it for electronic low-voltage loads up to 600 VA, dimmable LED or CFL lighting up to 300 W, and incandescent or halogen lighting up to 600 W. It is not for magnetic low-voltage fixtures, motors, receptacles, or transformer-operated appliances. The phase choice matters because a mismatched dimmer can produce flicker, hum, a narrow adjustment range, or a fixture that never turns fully off. Check the driver or fixture documentation before ordering. After installation, test the lowest usable level, full brightness, audible noise, heat, and behavior after a power interruption. My Leviton provides minimum and maximum level adjustments when the factory range does not suit the light. If an ordinary forward-phase LED dimmer already works with the fixture, D2ELV's roughly $77 street price is hard to justify. Its value is the ability to handle an ELV or reverse-phase load while keeping Matter control, not a broader set of standard Matter commands. ## Direct Matter does not remove the wiring rules Leviton ships the dimmer with a Matter setup code. A compatible controller can commission it directly over 2.4 GHz Wi-Fi, and a Leviton hub is not required. The dimmer can also be connected to My Leviton, either on its own or alongside Matter, for settings such as bulb mode, fade rates, schedules, night behavior, and device maintenance. Inside the wall, D2ELV requires line, load, neutral, and ground conductors. Leviton's manual also says it is not compatible with an ordinary 3-way switch. Multi-location control instead uses a listed Leviton companion: DD00R or DD0SR for a wired arrangement, or DAWDC or DAWSC for a wire-free companion. That can be a clean solution, but it changes the parts list for anyone replacing one dimmer in an existing multi-way circuit. Turn off and verify power before opening the wall box. If the neutral, load type, or multi-location wiring is uncertain, this is electrician work rather than a pairing problem. ## Matter carries brightness; Leviton keeps the tuning Leviton's current documentation names Apple Home, Google Home, Alexa, and SmartThings, and the setup guide gives a direct Matter path for each. The portable expectation is a light with on, off, and brightness control. Fixture tuning and Leviton's extra behaviors belong in My Leviton unless the chosen platform proves otherwise. Home Assistant supports Matter lights over local Wi-Fi, but Leviton does not name Home Assistant for this exact model. Treat that path as plausible through the standard rather than product-specific support. Pair the dimmer, confirm the light entity and transitions, and check the full range before an automation depends on a very low night setting. The same verification is worthwhile in every ecosystem. A Matter logo cannot establish how a particular driver behaves at 5 percent, and it does not turn Leviton's companion switches or app settings into shared Matter features. ## Buy for the load, then choose the platform D2ELV is a focused recommendation for a North American ELV or reverse-phase LED circuit with a neutral wire. It gives that difficult load a current Matter path, retains useful local wall controls, and avoids a separate brand bridge. Skip it for magnetic low-voltage lighting, no-neutral boxes, ordinary 3-way hardware that must remain, or a basic LED load that a cheaper dimmer already supports. Inovelli White Series, Aqara Dimmer Switch H2 US, and GE Cync Keypad Dimmer are broader smart-home alternatives, but none should be assumed to replace D2ELV on an ELV fixture without its own load documentation. The driver specification is the deciding source.